Get Protected

Four live photos and a 10-second engine-start clip, taken live with your phone camera. Each photo is stamped with the date, time and your GPS location. It takes about a minute.

1. Start the Engine (10-second clip) — Point the camera at the dashboard, tap record, then start the engine and let it idle for 10 seconds.
2. Odometer — With the engine running, make sure the odometer and any warning lights are clearly visible.
3. Engine Bay — Open the bonnet and keep the whole engine bay in frame.
4. Front & Left Side — Step back so the full front and left side fit in the frame.
5. Rear & Right Side — Make sure the registration number plate is clearly visible.

1. Switch On (10-second clip) — Point the camera at the dashboard, tap record, then switch the vehicle on to Ready mode.
2. Odometer — With the vehicle in Ready mode, show the odometer, battery level and any warning lights clearly.
3. Motor Compartment — Open the front compartment and show the motor and high-voltage components (where accessible).
4. Front & Left Side — Step back so the full front and left side fit in the frame.
5. Rear & Right Side — Make sure the registration number plate is clearly visible.

• Any malfunction warning light or error on the dashboard
• Abnormal engine sound
• Tampered odometer
• No service records from an authorised service centre
• Unauthorised modifications on the engine